Seismic performance of reinforced concrete tall buildings with conventional and non-conventional construction systems Conference

cited authors

  • Arita, L; Lezameta, R; Huaco, G; Garber, D

fiu authors

abstract

  • Currently in the city of Lima there is a limited number of high-rise buildings. Therefore, there is not much literature on this type of building in Peru. Peruvian codes focus on medium and low-rise buildings. For this reason, studies are required to analyze and design these tall buildings more appropriately according to the reality of the country. In this article, a pushover modal analysis of 6 types of 35-Story reinforced concrete buildings in the city of Lima will be developed. Three building models with different structural systems and square and rectangular plan are proposed, being the areas of 29m × 29m and 52m × 26m respectively. These structural systems are rigid core and frames with an energy dissipation system (fluid viscous dampers and shear-link-bozzo dissipators SLB) in order to study their behavior against seismic stresses. These buildings were based on the criteria and requirements of the current codes in the country as well as the distribution of the floor plan of buildings commonly used for offices and homes. Natural periods (T) were found to range from 2.6 to 3.3 seconds for rigid core buildings. There is an increase for viscous damping buildings from 4.2 to 5.4 seconds and also for SLB devices to range from 3.7 to 4.6 seconds. In turn, modal static nonlinear analysis was performed to obtain the capacity curves for each type of building, which were compared with the seismic demands according to the design provisions of the Peruvian seismic standard E.030 and an average of design spectra. of acceleration records of severe seismic events in Peru and scaled in a range of 0.2T to 1.5T. The performance points for each building case were determined following the ATC-40 methodologies, finding that tall buildings with a rigid core have approximately twice the stiffness of buildings with SLB dampers, as well as low ductility, unlike buildings with dissipators, that have a high ductility.

publication date

  • February 4, 2021

Digital Object Identifier (DOI)

volume

  • 1048

issue

  • 1