JOURNAL OF POWER SOURCES

JOURNAL OF POWER SOURCES Journal

publication venue for

A high-energy aqueous on-chip lithium-ion capacitor based on interdigital 3D carbon microelectrode arrays. 455. 2020
Poisoning of Ni-Based anode for proton conducting SOFC by H2S, CO2, and H2O as fuel contaminants. 378:255-263. 2018
Studies on intrinsic phase-dependent electrochemical properties of MnS nanocrystals as anodes for lithium-ion batteries. 338:9-16. 2017
Thermodynamic stability maps for the La0.6Sr0.4Co0.2Fe0.8O3 +/-delta-CO2-O-2 system for application in solid oxide fuel cells. 336:351-359. 2016
Hierarchical NiCo2O4@nickel-sulfide nanoplate arrays for high performance supercapacitors. 276:19-25. 2015
3-dimensional carbon nanotube for Li-ion battery anode. 219:364-370. 2012
Facile synthesis of silicon films by photosintering as anode materials for lithium-ion batteries. 214:21-27. 2012
Electrochemically activated carbon micro-electrode arrays for electrochemical micro-capacitors. 196:2403-2409. 2011
Enhanced electrochemical performance of porous NiO-Ni nanocomposite anode for lithium ion batteries. 196:9625-9630. 2011
Heat treatment effect of the Ni foam current collector in lithium ion batteries. 196:8742-8746. 2011
Evaluation of silver as a miniature direct methanol full cell electrode. 195:46-53. 2010
Optimizing the mass transport phenomenon around micro-electrodes of an enzymatic biofuel cell inside a blood artery via finite element analysis method. 195:4685-4694. 2010
Assessing the catalyst processing for low temperature cofired ceramic-based direct methanol fuel cells. 189:935-942. 2009
Fabrication and properties of a carbon/polypyrrole three-dimensional microbattery. 178:795-800. 2008
Semi-analytical proton exchange membrane fuel cell modeling. 183:164-173. 2008
A dynamic 1D model of a solid oxide fuel cell for real time simulation. 171:634-643. 2007
Analytical correlations for intermediate temperature PEM fuel cells. 160. 2006
Parametric model of an intermediate temperature PEMFC. 156:414-423. 2006
Three dimensional modeling of high temperature PEM fuel cells. 160:215-223. 2006
Analysis of an energy recovery system for reformate-based PEM fuel cells involving a binary two-phase mixture. 141:258-264. 2005
A passive fuel delivery system for portable direct methanol fuel cells. 132. 2004
Performance evaluation of an energy recovery system for fuel reforming of PEM fuel cell power plants. 109. 2002
A review of application of carbon nanotubes for lithium ion battery anode material 2012
Review and comparison of approaches to proton exchange membrane fuel cell modeling 2005

category

CHEMISTRY, PHYSICAL Web of Science Category
ELECTROCHEMISTRY Web of Science Category
ENERGY & FUELS Web of Science Category
MATERIALS SCIENCE, MULTIDISCIPLINARY Web of Science Category

International Standard Serial Number (ISSN)

0378-7753

Electronic International Standard Serial Number (EISSN)

1873-2755

journal abbreviation

J POWER SOURCES