MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING Journal
Overview
publication venue for
- In-situ mechanical investigation of the deformation of splat interfaces in cold-sprayed aluminum alloy. 737. 2018
- Effect of graphene reinforcement on the mechanical properties of Ti2AlC ceramic fabricated by spark plasma sintering. 728. 2018
- Effect of warm rolling and annealing on the mechanical properties of aluminum composite reinforced with boron nitride nanotubes. 710:366-373. 2018
- In-situ deformation mechanism and orientation effects in sintered 2D boron nitride nanosheets. 708:440-450. 2017
- Deformation mechanism in graphene nanoplatelet reinforced tantalum carbide using high load in situ indentation. 674:270-275. 2016
- Improvement of aging kinetics and precipitate size refinement in Mg-Sn alloys by hafnium additions. 651:854-858. 2016
- Indentation creep behavior of cold sprayed aluminum amorphous/nano-crystalline coatings. 658:415-421. 2016
- Influence of loading path and precipitates on indentation creep behavior of wrought Mg-6 wt% Al-1 wt% Zn magnesium alloy. 650:183-189. 2016
- A comparative study of indentation induced creep in pure magnesium and AZ61 alloy. 630:131-138. 2015
- Boron nitride nanotubes reinforced aluminum composites prepared by spark plasma sintering: Microstructure, mechanical properties and deformation behavior. 574:149-156. 2013
- Graphene NanoPlatelets reinforced tantalum carbide consolidated by spark plasma sintering. 582:338-346. 2013
- A comparison of mechanical and wear properties of plasma sprayed carbon nanotube reinforced aluminum composites at nano and macro scale. 528:3375-3384. 2011
- Spark plasma sintered tantalum carbide-carbon nanotube composite: Effect of pressure, carbon nanotube length and dispersion technique on microstructure and mechanical properties. 528:2538-2547. 2011
- Spark plasma sintered tantalum carbide: Effect of pressure and nano-boron carbide addition on microstructure and mechanical properties. 528:1287-1295. 2011
- Microstructure and tribological behavior of spark plasma sintered iron-based amorphous coatings. 527:5000-5007. 2010
- Dual strengthening mechanisms induced by carbon nanotubes in roll bonded aluminum composites. 523:263-270. 2009
- Effect of sintering on thermally sprayed carbon nanotube reinforced aluminum nanocomposite. 480:323-332. 2008
- Synthesis and characterization of plasma spray formed carbon nanotube reinforced aluminum composite. 381. 2004
- Measurement of field emission current variations caused by an amplitude modulated laser. 327. 2002
- Fatigue and fracture behavior of nickel-titanium shape-memory alloy reinforced aluminum composites. 314. 2001
- The problem of fiber pullout. 203. 1995
- DEVELOPMENT OF CONSTITUTIVE RELATIONSHIPS FOR THE HOT DEFORMATION OF BORON MICROALLOYING TIAL-CR-V ALLOYS. 192. 1995
- EFFECT OF NOTCHES AND MICROSTRUCTURE ON THE FRACTURE-TOUGHNESS OF TIAL-BASED ALLOYS. 192. 1995
- MECHANICAL ALLOYING OF CERAMICS IN ZIRCONIA CERIA SYSTEM 1994
Research
category
- MATERIALS SCIENCE, MULTIDISCIPLINARY Category
- METALLURGY & METALLURGICAL ENGINEERING Category
- NANOSCIENCE & NANOTECHNOLOGY Category
Identifiers
International Standard Serial Number (ISSN)
- 0921-5093
Electronic International Standard Serial Number (EISSN)
- 1873-4936
Other
journal abbreviation
- MAT SCI ENG A-STRUCT